Motorola SB5102 - Manual (Page 25)

Configuring TCP/IP in Windows 2000, continued
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary License
SB5102 Cable Modem User Guide 18
10 On the Local Area Connection number Properties window, be sure the box next to
Internet Protocol (TCP/IP) is checked.
11 Click Properties. The Internet Protocol (TCP/IP) Properties window is displayed as
shown at bottom left.
12 Be sure Obtain IP address automatically and Obtain DNS server address
automatically are selected.
13 Click OK to accept the TCP/IP settings.
14 Click OK to close the Local Area Connection number Properties window.
15 Click OK when prompted to restart your computer and click OK again.
When you complete the TCP/IP configuration, go to “Verifying the IP Address in Windows
2000 or Windows XP” on page 27.