Timer recording, One-touch timer recording (otr), English – Memorex MVT2194 User Manual

Page 21

ENGLISH

2 3 T H
Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р

7 : 0 0PM 9 : 3 0PM 0 0 7
Р : Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

/ / ENTER/CANCEL/MENU

SLP

TIMER REC SET

DATE
START
END
CH

007

SPEED

/ ENTER/MENU

SLP

23(THU)

7 : 00PM
9 : 30PM

Press the

▲

▼

button to

select the program position, then
press the ENTER button.

Press the

button to select

the date, then press the

▼

button.

Set the start time, end time, channel and tape speed as in
step 4, then press ENTER.

Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р
Р Р Р Р Р

Р : Р Р

Р Р Р

Р Р Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

Р : Р Р

Р Р Р

/ / ENTER/MENU

TIMER REC SET

DATE

23(THU)

START

8:30AM

END

– – : – –

012

SPEED

/ MENU

TIMER REC SET
AUTO REPEAT

/ MENU

EXAMPLE: One-touch Timer Recording for 30 minutes.

Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.

EXAMPLE: Program a timer recording for 23rd day, channel
007 (CABLE), 7:00 - 9:30 PM (Tape speed : SLP).

• Load a video cassette with the erase prevention tab

intact. The TV/VCR will automatically turn on.

• Set the TV/CABLE selection to the appropriate position

(See page 15).

NOTES: • If programming is performed without a tape in

the TV/VCR, or with a tape without an erase
prevention tab, the Timer Recording is not
possible. If a tape without an erase prevention
tab is in the TV/VCR, the tape will be ejected.

• To record from the external equipment press

the

button repeatedly until “L” (LINE:

from AUDIO/VIDEO IN jack on the front)
appears when setting the channel in step 5.

• The VCR section cannot be used while the

T-Rec indicator is lit. If you want to use the
VCR operation, press the TIMER REC button
to deactivate the timer.

• After a power failure or disconnection of the

power plug, all programmed recording setting
and time display will be lost upon resumption of
power. In this case, reset the clock (see page
13) and reprogram any timer recordings.

• If you want to correct the digits while setting,

press the

▲

▼

button until the item you

want to correct, then press the

button to

correct the desired setting.

The One-Touch Timer Recording feature provides a
simple and convenient way to make a timed recording.

ONE-TOUCH TIMER
RECORDING (OTR)

Press the Direct Channel Selection buttons or CH

button to select the channel to be recorded.

Press the REC/OTR button to
begin recording. Press the button
again to stop recording after 30
minutes. Each additional press of
the REC/OTR button will increase
recording time as shown below,
up to a maximum of 6 hours.
“OTR” will appear on the screen.

NOTES: • Press the REC/OTR

button to increase the
time needed for recording
(See the chart right).

• To cancel OTR, press

the STOP button.

• The TV/VCR channel

cannot be changed
during recording.

Press the POWER button to turn on the TV/VCR.

Load a video cassette with the erase prevention tab in-
tact.

Press the SPEED button to
select the desired tape speed
(SP or SLP). SP or SLP will
appear on the screen.

Set the TV/CABLE option to the
appropriate setting (See page 15).

OTR 0 : 30

CH 012

INDEX

00:00:00 SP

- VHF/UHF channels

CABLE

- CABLE TV channels

Press

once

twice

3 times

4 times

5 times

6 times

7 times

8 times

9 times

10 times

Recording time

NORMAL REC

0:30

1:00

1:30

2:00

3:00

4:00

5:00

6:00

NORMAL REC

TIMER RECORDING

Press the MENU button.
Press the

button to select

the

option.

Press the

▲

▼

button to select

the TIMER REC SET option, then
press the

button.

TIMER RECORDING

To set the timer for another program, press the

▲

▼

button until the number of the second program
highlighted, then press the ENTER button. Repeat
steps 4 to 5 to set the second program.

Press the TIMER REC button. The T-Rec indicator
will light. The Timer is programed, when the programed
time is reached, the recording is automatically started.

To cancel timer recording, press the TIMER REC button
again and T-Rec indicator will go out.

5M10421A E P18-25

26/5/04, 10:45