Memorex MVT2194 - Manual (Page 13)

13
ENGLISH
8:30 AM SAT
1 To turn on the TV/VCR, press the POWER button.
2 Adjust the volume level by
pressing the VOL + or –
button. The volume level will be
indicated on the screen by
green bars. As the volume level
increases, so do the number of
bars. If the volume decreases, the number of green
bars also decreases.
3 Set the TV/CABLE menu option to the appropriate
position (see page 15).
You must set the date and time for Timer Recordings
and ON/OFF Timer.
EXAMPLE: Setting the clock to “8:30 AM”, 30th (SAT)
October, 2004.
1 Press the MENU button.
Press the
B or A button to select
the option.
2 Press the ▲ or ▼ button to
select the CLOCK SET option,
then press the
A button.
3 Press the B or A button to set the
month, then press the ▼ button.
4 Set the day, year and time as in
step 3.
After setting the clock, date and time
starts functioning automatically.
NOTES: • After a power failure or disconnection of the
power plug, the time display will be lost. In
this case, set the present time again.
• To move cursor backward, press the ▲ button.
VOLUME 32
MANUAL CLOCK SETTING TV OPERATION
NOTES: • If a channel with no broadcast is selected,
the sound will automatically be muted.
• If a station being viewed stops broadcasting,
the TV will automatically shut itself off after
15 minutes.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are
pressed, the corresponding
channel will be selected in 2
seconds.
CH 012
4 Press the Direct Channel selection buttons to select
the channel.
• TV mode direct channel selection
When the TV/CABLE menu option is in the TV
position, all channels can be instantly selected by
using two buttons (for example, to select channel 2,
press “0”, then “2”. If you press only “2”, channel
selection will be delayed for a few seconds). For
channels 10 and above, press the 2 digits in order.
• CABLE mode direct channel selection
When the TV/CABLE menu option is in the CABLE
position, channels can be selected as follows:
• TO SELECT CABLE CHANNELS:
1-9 Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press “002”.
10-12 Press “0”, then the remaining 2 digits.
Example, to select channel 12, press “012”.
13-99 Press the 2 digits in order.
Example, to select channel 36, press “36”.
100-125 Press the 3 digits in order.
Example, to select channel 120, press “120”.
VHF/UHF/CABLE CHANNELS
TV - VHF/UHF Channels
CABLE - CABLE TV Channels
TV CABLE
VHF
2-13
UHF
14-69
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
STANDARD TIME
DAYLIGHT
SAVING TIME
/ / / MENU
ON
CH
CLOCK SET
MONTH
DAY
YEAR
TIME
ENTER/MENU
10
1(MON)
2004
12:00AM
/ / / /
CH
CLOCK SET
MONTH
DAY
YEAR
TIME
ENTER/MENU
10
30(SAT)
2004
8:30AM
/ / / /
CH
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
STANDARD TIME
DAYLIGHT
SAVING TIME
/ / / / MENU
ON
CH
5M10421A E P10-17 26/5/04, 10:44 13