Multi-Tech Systems Modem Module MT3334SMI - Manual (Page 49)

Chapter 4 - Class 2 Fax Commands
MT3334SMI 49
+FDIS Reports DIS Frame Information
Syntax: +FDIS:VR,BR,WD,LN,DF,EC,BF,ST
Usage: Reports remote FAX capabilities and intentions. The subparameters are described in
the +FDCS command description.
+FET Post Page Message Response
Syntax: +FET:
Usage: Generated by the receiving modem after the end of Phase C reception, on receipt of
the postpage message from the transmitting station. The codes are
described in the +FET command description.
+FHNG Call Termination with Status
Syntax: +FHNG:
Usage: Indicates that the call has been terminated. The values are
described in the +FAXERR command description.
+FPTS Receive/Transmit Page Transfer Status
Syntax: +FPTS:
Usage: Reports a number representing the copy quality and related post page
message. The valid values are defined in the +FPTS command description.
+FTSI Report the Remote ID
Syntax: +FTSI:””
Usage: Reports the transmitting station’s ID.
For More Information
To obtain Data and Fax specifications and standards (e.g., Class 1 documents (EIA/TIA-578), and
Class 2 documents - EIA/TIA Project Number 2388, Async Fax DCE Control Standard Service Class
2, TR29.2), contact:
Telecommunications Industry Association (TIA)
2500 Wilson Boulevard
Suite 300
Arlington, VA 22201
Ph: 703-907-7700
http://www.tiaonline.org/
The ITU is the leading publisher of international telecommunication standards. For further
information contact [email protected] or http://www.itu.int/publications/index.html
Global Engineering maintains extensive collections of documents from more than 400 standards-
developing organizations worldwide, including: TIA/EIA-578 - Class 1 documents, TIA/EIA-592 -
Class 2 documents.
EIA TSB 43 (corrections to TIA/EIA-578), EIA SP 2987 (draft of changes to TIA/EIA-578), and CCITT
v7.3 - T.1-T.90 standards (including (T.4 and T.30). Contact:
Global Engineering Documents
800-854-7179 (phone)
303-792-2192 (fax)
http://global.ihs.com/