Motorola XTN Series XU2100 - Manual (Page 17)

5
Ge
tting S
tar
ted
X
Installing the Nickel-Metal Hydride Battery
Your radio is powered by a NiMH
battery, which provides up to 15 hours*
of usage. Please refer to page 9.
•
Slide the Ribbed Latch on the bottom
of the radio away from the battery
door, or toward the contacts.
• Slide and lift the battery door off.
• Position the battery with the
Motorola Logo side up, and the
charge contacts are facing the
bottom of the radio. Insert the top of
the battery into the radio and push
the battery up and into the battery
compartment to fit tightly into place.
• Slide and snap the battery door into
place.
*Based upon 5% transmit/ 5% receive/
90% standby (standard duty cycle).
Ribbed
Latch
1
2
6881038B80.book Page 5 Wednesday, September 26, 2001 4:16 PM