Monessen Hearth 424WBST - Manual (Page 22)

22
424WBST Designer Woodburning Fireplaces
87D1506
Chimney Components
Round Top Termination Round termination to be used with SK8 chimney RLTSK8
system. (Flashing not included.)
Long Round Top Round top to be used with a chase installation RLTSK8L
Termination utilizing SK8 chimneysystem.
Knock-down Shroud - Black pyramid knock-down shroud used for PKDSBL
Pyramid chase installations with any RLT round top
termination. Gives appearance of a pyramid cap.
Knock-down Shroud - Black square knock-down shroud used for SKDSBL
Square chase installations with any RLT round top
termination. Gives appearance of a square cap. Adaptor required
Square Termination Top housing with simulated brick pattern. T20B
(Red, Tan or Black) Proper adapter must be
used. Includes flashing.
Adapter Required adapters for T20B top housing. CF8CA (SK8)
Housing Extensions Extends Square Termination on steep pitched roofs. 202036
Flashing Metal finishing required around Contemporary 8-6-12 with 8" flue:
Termination to prevent rain leakage. 0-6/12 pitch
8-12-12 with 8" flue:
6/12-12/12 pitch
Square Termination Top housing of simulated brick pattern T20B
available in red, tan or white. Appropriate
adapter required. Flashing included.
SK8 Pipe used to build 8" SK8 flue systems. SK81 (1' Long)
Chimney Sections SK818 (1Z\₂' Long)
SK83 (3' Long)
SK84 (4' Long)
Chimney Elbows Elbow used to create an offset in a SK830 / 2 (SK8)
chimney system. Only 30° elbows available.
Packaged 2 per carton (offset and return).
Firestop Required at each floor level of chimney SKFS2A — SK8
installation. (Plus attic on multi-story installation.) (8" straight flue)
SKFS6A — SK8
(8" 30° inclined flue)
Chimney Support Used to support chimney for each of: 20' vertical SKCS8 - SK8
height and 6' of angled chimney run.
Attic Insulation Shield Used to prevent insulation from coming in contact AIS-SK - SK8
with the chimney system.
U.S.
Model Number Description Component