MicroBoards Technology Orbit 3 User Manual

Page 9

Orbit 3 MICROBOARDS TECHNOLOGY, LLC

HDD (02)?
FREE

HDD (02)?
DVD-VIDEO 4.0GB

Disc-to-HDD Copy

The number of partitions available will depend on the capacity of the hard drive installed in the Orbit 3.
If your master is not already on the hard drive, please follow these steps.

1. Press

or the up or down arrows until the display reads SYSTEM SETUP. Press YES.

2. The display will read DISC TO DISC; press NO. The display will read DISC TO HDD.
3. Press

YES

, then use the up or down arrows to select the hard drive

partition to which you would like to register the master. In this
example, Hard Drive partition 02 is selected.

4. Use the down arrow until the display reads Exit and press YES.

Press NO or the down arrow and the display will read COPY? DISC to HDD (02).

5. Next, follow the directions as listed in Disc-to-Disc Copy. The display will show which hard drive

partition is the source of the master, as well as the type and size of the master on that partition. After
reading the master to the selected hard drive partition, duplication will begin automatically.

HDD-to-Disc Copy

If your master is already on the hard drive, please follow these steps. If you have no masters on the hard
drive, this option will not appear in the System Setup menu.

1. Press

or the up or down arrows until the display reads SYSTEM SETUP. Press YES.

2. The display will read DISC TO DISC; press NO until the display reads HDD TO DISC.
3. Press

YES

, then use the up or down arrows to select the hard drive

partition from which you would like to burn. In this example, Hard
Drive partition 02 is selected.

4. Exit Use the down arrow until the display reads Exit and press YES.

Press NO or the down arrow and the display will read COPY? HDD (02) to DISC.

5. Next, follow the directions as listed in Disc-to-Disc Copy. The display will show which hard drive

partition is the source of the master, as well as the type and size of the master on that partition. The
reader drive does not need to be loaded when burning from an existing HDD partition.

Deleting Hard Drive (HDD) Partitions

The Delete option will not appear in the System Setup menu if there is no information stored on any of the
hard drive partitions.

1. Press

or the up or down arrows until the display reads SYSTEM SETUP. Press YES.

2. Press

or the up or down arrows until the display reads DELETE. Press the YES button.

3. The display will show the first partition containing an image:

4. You can now select which hard drive partition to erase. Pressing the NO or ▼ button will scroll you

though the partition selections that contain information.

5. Press the YES button if you are sure you want to clear the HDD. The partition selected will be

cleared.

6. Press

ESC

to exit this menu, or scroll through the filled partitions if you would like to delete another.