Morphy Richards BULLDOG CYLINDER 70191REV2 - Manual (Page 6)

6
Opening the dust
bag container
To access the dust bag Release the cover
clips by lifting the bottom of the clips
upwards. Then lift off the dust bag container
cover.
Removing the dust
bag
1 Lift the dust bag holder ‚ upwards to
remove.
2 Slide the dust bag away from the inlet
tube ·
3 Dispose of the bag with your household
waste.
Refitting the dust
bag
1 Slide the bag over the dust inlet tube.
Push the bag fully onto the tube until it
reaches the stop.
2 Slide the dust bag holder ‚ down over
both the cardboard collar of the bag and
the plastic stop. The bag should now be
firmly held against the stop.
Refitting the dust
container cover
1 Place the cover on top of the dust bag
container.
2 Secure the fixing clip on top of the cover
and then pressing the bottom part of the
clips down
70191rev2 17/1/06 1:31 PM Page 6