Gateway FPD1985 - Manual (Page 15)

Adjusting monitor settings www.gateway.com
11
OSD menus
OSD Menu Description
Main menu Auto—Automatically adjusts your monitor to its optimum
settings.
Picture—Opens the Picture menu, where you can adjust
brightness, contrast, and gamma.
Geometry—Opens the Geometry menu, where you can
adjust image size and minimize distortions.
Advanced—Opens the Advanced menu, where you can
adjust color balance, change the OSD language, and display
information about current monitor settings.
Reset—Resets the monitor to its factory settings.
Picture menu Brightness—Adjusts the amount of light in the darkest
portion of the picture. Use the lowest brightness setting you
are comfortable with to maximize the life of the monitor
backlights.
You may need to readjust brightness after the monitor has
warmed up.
Contrast—Adjusts the level of white between the lightest
and darkest portions of an image.
Gamma—Customizes the gamma level. High gamma levels
increase white levels and low gamma levels increase contrast.
Geometry menu H-Position—Moves the monitor image left and right.
V-Position—Moves the monitor image up and down.
You can also press the Auto button to configure the vertical
and horizontal position automatically.
Clock—Minimizes any vertical bars or stripes visible on the
screen background. The horizontal screen size will also
change.
Phase—Minimizes any horizontal distortion and clears or
sharpens the displayed characters.
Main Menu
Auto
Picture
Geometry
Advanced
Reset
Picture
Brightness
Contrast
Gamma
80
Geometry
H-Position
V-Position
Clock
Phase
50
8511460.book Page 11 Thursday, April 6, 2006 2:32 PM