GIGABYTE GN-BR404W - Manual (Page 7)

1-2. Physical Interface
Four Ethernet LAN Port
RJ-45, Auto-sensing and Auto-MDI/MDIX for 10/100M Ethernet LAN connection
One Ethernet WAN Port
RJ-45, Auto-sensing for 10/100M Ethernet WAN connection
Init Bottom
Initial reset (Init to factory default)
Power
The power port is where you connect the power adapter.
External PCMCIA Card Slot
Support the Gigabyte GN-WMAG and the GN-WLMA101 Wireless PCMCIA Card.
1-3. LED Indicators
 Status
Green light Power on
Red light The device is damaged.
 WAN (Green light)
On ADSL/Cable Modem is connected to WAN port.
Blinking Transmit or receive data via the WAN port.
 LAN1-LAN4 (Green Light)
On 10/100 Mbps Network Connection
Blinking 10/100 Mbps Data Transmission Rate
 Wireless (Green Light)
On The PCMCIA Card is plugged in.
Blinking Package transmit
Off The green light off means No PCMCIA Card installed.
2