Graco 8483 User Manual

Page 29

8.2 Airplane Use

8.3 Cupholder (Optional)

1. Insert the two prongs

of the cupholder into

the two slots on either

the left or right side of

the seat

2. Push cupholder down

until the clip snaps on

to the bottom of seat

CHECK that cupholder

is secure by pulling on it.

This restraint is certified for use in Motor Vehicles. It is

certified for use in Aircraft ONLY when used with the

built-in harness. When used as a booster without

the harness, this restraint is NOT certified for use

in aircraft because there is no shoulder belt available.
Important points to remember
1. Airlines have some restrictions about the use of

car seats.

2. Install your car seat on an airplane in the same way

it is installed in an automobile with a lap belt (see

Section 6.2, Securing the Car Seat in Your Vehicle,

pp. 21-22).

3. Check that the airplane seat belt holds the car seat

securely in place at all times.

Clip