Graco 8483 - Manual (Page 28)

28
8.0 Additional information
8.1 Using the Tether
1. Check that tether is
securely attached to
car seat.
2. Fasten tether clip to
anchor point ‹ .
3. Tighten the tether strap
securely Π.
4. Check car seat tightness
after securing tether.
If necessary, retighten
vehicle seat belt when
used with the built-in
harness.
5. To loosen, lift up on
the metal tongue of the
buckle  .
If you want to use the tether, check your vehicle
owner’s manual for the location(s). If your vehicle is
not equipped with a tether anchor, it may be possible
to install one. Contact your vehicle dealership for the
proper anchor location and installation. You may
purchase tether anchor parts kit by calling Graco
Customer Service at 1-888-224-6549.
‹
Œ
