Graco 8483 User Manual

Page 16

To Install Locking Clip:
1. Tighten the buckled

belt by pushing down

hard on the car seat

and pulling hard on the

shoulder belt.
2. While pushing down on

seat, pinch the two straps

together behind the the

buckle tongue. Unbuckle

the belt without allowing

it to slip.
3. Connect lap and

shoulder belts as

shown

4. Rebuckle belt. Check

that lap belt does not

move by pulling hard. If

belt loosens or lengthens,

repeat procedure.
Remove locking clip when

not using car seat. Store

under it’s tab on the back

of seat.

inch