GE PB3-POS-RP - Manual (Page 10)

PB3-POS-RP ProBridge
User Manual 10
PB3-POS-RP ProBridge includes:
• (1) PB3-POS-RP ProBridge unit.
• (1) P/N 4310-0034B: RJ45 to RJ45 cable. Connects the
PB3 to RS485 Network. This cable is 6’ in length.
• (1) P/N 4310-0068A: serial device Interconnect Cable.
This cable is 14” in length.
• (1) P/N 4310-0047B: RJ45 to DB9F cable. Connects the
PB3 to the DVMRe. This cable is 6’ in length.
• (1) P/N 4310-0069A: serial device to PB3 Cable. This
cable is 6’ in length.
• (1) P/N 0900-0176: Triport Cable. This cable is 6’ in
length.
• (1) P/N 4010-0007: 12VDC 120VAC Power Supply or (1)
P/N 4010-0008: 12VDC 220VAC Power Supply.
• (1) P/N 0150-0231C: PB3-POS-RP User Manual.
Installation Environment
Power: Ensure that the installation site’s AC power is stable
and within the rated voltage of the external power supply. If the
site’s AC power is likely to have spikes or dips, use power line
conditioning or an Uninterruptible Power Supply.
Temperature: Observe the unit’s ambient temperature
specifications when choosing a location for the unit. Extremes of
heat or cold beyond the specified operating temperature limits
may cause the unit to fail. Do not install this unit on top of other
hot equipment.