Graco HIGH-FLO 220-569 - Manual (Page 39)

307-809 39
Accessories
Use Only Genuine Graco Parts and Accessories
Mounting Stand Kit 218–742
For mounting the surge tank
to the floor.
Pump Floor Stand 220–581
For mounting medium volume
High-Flo pumps in a
suction feed system.
Refer to the Medium Volume
High-Flo Accessories Manual,
307–837.
Stationary Stand 207–872
For President, Bulldog, and Senator Pumps.
Wall Bracket 206–221
For mounting medium volume High-Flo pump to a wall.
Portable Cart 218–028
For President, Bulldog, and Senator Pumps.
Packing Nut Wrench 110–335
For tightening the packing nut.
Throat Seal Liquid (TSL)
Non-evaporating liquid for packing nut/wet-cup.
206–995 0.95 liter (1 quart)
206–996 3.8 liter (1 gal.)
Graco-Approved Hydraulic Fluid
169–236
20 liter (5 gal.)
207–428 3.8 liter (1 gal.)
Hydraulic Shutoff Valve 102–644
For hydraulic supply or return line. 3/4 npt(f).
Hydraulic Supply and Return Hose
10.5 MPa, 105 bar (1500 psi) Maximum Working
Pressure
5/8 in. ID, coupled 3/4 npt x 7/8–14, 90_ swivel elbow,
grounded, for return line.
180–091 0.9 m (3 ft) long
180–092 1.8 m (6 ft) long
13.8 MPa, 138 bar (2000 psi) Maximum Working
Pressure
1/2 in. ID, coupled 1/2 npt(m) x 3/4–16, 90_ swivel
elbow, grounded, for supply line.
180–090 0.9 m (3 ft) long
180–093 1.8 m (6 ft) long
Pump Mounting Adapter Kits
Provides adapter plate and tie rods for retrofitting
existing motor to a High-Flo displacement pump. Refer
to Medium Volume High-Flo Accessories Manual
307–837.
220–579 For Series A, B, C, or D Bulldog Mo-
tors, Part No. 208–356, and Series A
Senator Motor, Part No. 217–540.
More recent series of these motors do
not require this kit.
221–159 Required for all Viscount I and Presi-
dent Motors.
Siphon Tube Kit 213–099
To draw fluid from a 200 liter
(55 gallon) drum.