English, Create raid volume, Ga-8anxp-d motherboard - 70 – GIGABYTE GA-8ANXP-D User Manual
Page 70
GA-8ANXP-D Motherboard
- 70 -
English
Create RAID Volume
Press Enter under Create RAID Volume to set up RAID.
Intel(R) Application Accelerator RAID Option ROM v4.0.6180
Copyright(C) 2003-04 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
[ HELP ]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
can not contain special characters.
[
]-Change
[TAB]-Next
[ESC]-Previous Menu
[ENTER]-Select
Name :
RAID_Volume0
RAID Level :
RAID0(Stripe)
Disks :
Select Disks
Strip Size :
128KB
Capacity :
223.5 GB
Create Volume
After entering the Create Volume Menu, you can set disk name with 1~16 letters (letters cannot be special
characters) under Name item.
After setting disk name, press Enter to select RAID Level.
Intel(R) Application Accelerator RAID Option ROM v4.0.6180
Copyright(C) 2003-04 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
[ HELP ]
Choose the RAID level best suited to your usage model.
RAID0(Stripe)- Creates a volume where equal portions of the volume
are spread across all the disks. This creates a volume
with higher performance by accessing all disks at once.
RAID1(Stripe)- Creates a volume where a redundant copy of the data is
stored on each disk. This creates a volume protected
from a single hard disk failure.
[
]-Change
[TAB]-Next
[ESC]-Previous Menu
[ENTER]-Select
Name :
RAID_Volume0
RAID Level :
RAID0(Stripe)
Disks :
Select Disks
Strip Size :
128KB
Capacity :
223.5 GB
Create Volume
There are two RAID levels: RAID0(Stripe) and RAID1(Mirror). After selecting the RAID level, press Enter to
select Strip Size.