GIGABYTE GA-8ANXP-D - Manual (Page 42)

GA-8ANXP-D Motherboard - 42 -
English
2-6 PC Health Status
Current Voltage(V) Vcore / DDR18V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/POWER/SYSTEM FAN Speed (RPM)
Detect CPU/POWER/SYSTEM Fan speed status automatically.
CPU Warning Temperature
60 o C / 140 o F Monitor CPU temperature at 60 o C / 140 o F.
70 o C / 158 o F Monitor CPU temperature at 70 o C / 158 o F.
80 o C / 176 o F Monitor CPU temperature at 80 o C / 176 o F.
90 o C / 194 o F Monitor CPU temperature at 90 o C / 194 o F.
Disabled Disable this function. (Default value)
CPU/POWER/SYSEM FAN Fail Warning
Disabled Fan warning function disable. (Default value)
Enabled Fan warning function enable.
CPU Smart FAN Control
Disabled Disable this function.
Enabled Enable CPU Smart Fan control function. (Default value)
a. When the CPU temperature is higher than 65 degrees Celsius, CPU fan
will run at full speed.
b. The speed of CPU fan will increase linearly depand on the temperature if
the temperature is more than 41 degree and less than 65 degree.
c. When the CPU temperature is lower than 40 degrees Celsius, CPU fan will
be disable.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PC Health Status
Vcore OK
DDR18V OK
+3.3V OK
+12V OK
Current CPU Temperature 50 o C
Current CPU FAN Speed 3308 RPM
Current POWER FAN Speed 0 RPM
Current SYSTEM FAN Speed 0 RPM
CPU Warning Temperature [Disabled]
CPU FAN Fail Warning [Disabled]
POWER FAN Fail Warning [Disabled]
SYSTEM FAN Fail Warning [Disabled]
CPU Smart FAN Control [Enabled]
CPU FAN PIN Type [3 PIN]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F3: Language F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
Item Help
Menu Level`
[Disabled]
Don't reset case
open status
[Enabled]
Clear case open status
and set to be Disabled
at next boot