Listening to the radio, Selecting the tuner, Manual tuning – Gateway kas303 User Manual

Page 63: Selecting the tuner manual tuning

Listening to the radio

www.gateway.com

Listening to the radio

Selecting the tuner

To select the tuner:

Press the

INPUT SELECTOR

button on the receiver or the

TUNER

button on

the remote control to select the tuner.

Press the

AM/FM MODE

button on the receiver to cycle between the

following bands:

FM STEREO

FM MONO

, and

When FM stereo broadcasts are poor because of weak broadcast signals, select
the FM mono mode to reduce the noise. The FM broadcasts are reduced to
monaural sound.

Manual tuning

To manually tune the tuner:

If you are using the buttons on the receiver, repeatedly press the

TUNE

MODE

button on the receiver to select Tuning mode. The

PRESET

light turns

off.

- OR -

If you are using your remote control, go to the next step.

Repeatedly press the up and down

TUNING/PRESET

buttons on the receiver

or the – and +

TUNE

buttons on the remote control until the frequency you

want is set.