GIGABYTE AirCruiser G GN-BR01G - Manual (Page 49)

45
The Status Button
On the Status page the router’s current connection and configuration
information is displayed for the following; LAN Ethernet, WAN Ethernet, ARP
Table, DHCP Lease Table, Routing Table, UPnP Port Mapping Table.
Figure 7-13 – Status
LAN IP Address
Displays the primary IP address being used by the Local (LAN) port of
the Router. The default is 192.168.1.254
LAN Netmask
Displays the IP Subnet Mask being used by the Local (LAN) port of
the router. Default is 255.255.255.0
LAN DHCP Status
Identifies if the Router’s built-in DHCP server is active for the attached
devices on the LAN.
LAN DHCP Start IP
The starting IP number in the range possible IP addresses issued by
the DHCP server.
LAN DHCP End IP