GIGABYTE AirCruiser G GN-BR01G - Manual (Page 27)

23
The MAC Access Control Tab
Figure 6-7 – MAC Access Control
The MAC Access Control screen allows you to specify the Media Access
Controller (MAC) address of up to 32 devices on your network. Only those
devices listed in the table will have access to transmit data through the
AirCruiser G. In this way, even if someone manages to obtain all the
information necessary to connect to your network, if their MAC address is not
permitted, they still cannot connect. Keep in mind, however that MAC
addresses can be spoofed, so it is not a panacea but rather another component
of your existing security process. Enable the feature, then key in the MAC
addresses to be allowed. Enter the MAC in the form separated by colon.
The default setting is Disable.