GIGABYTE AirCruiser G GN-BR01G - Manual (Page 12)

8
Making a Wired Connection
Step 1 Turn off all the hardware devices in your network, including the
ADSL/Cable modem by unplugging their power supply.
Step 2 Connect the Ethernet cable of your ADSL/Cable modem to the WAN
port of the Router.
Step 3 Connect one end of a new Ethernet cable to a LAN port in the rear
panel of the Router to the 10/100 Ethernet port of your computer.
(NOTE: It does not matter which numbered LAN port is selected).
Step 4 Plug the power adapter cord into the router’s power jack and then
plug the power adapter into a power outlet.
Step 5 Turn on your ADSL/Cable modem. After verifying all the connections,
proceed to Chapter 4 – Configuring the AirCruiser G Wireless
Router.
Making a Wireless Connection
Step 1 Turn off all the hardware devices in your network, including the
ADSL/Cable modem by unplugging their power supply.
Step 2 Connect the Ethernet cable of your ADSL/Cable modem to the WAN
port of the Router.
Step 3 Plug the power adapter cord into the router’s power jack and then
plug the power adapter into a power outlet.
Step 4 Turn on your ADSL/Cable modem. After verifying all the connections,
proceed to Chapter 4 – Configuring the AirCruiser G Wireless
Router
Note: If using a wireless connection, please refer to the user manual of the
wireless adapter to install. The SSID of the wireless adapter and the
Router should be identical. The default SSID assigned to the Router is
GIGABYTE. (WARNING: The SSID field is case sensitive, so for
example “a” is different from “A”).