Genie IWP Super Series 48643 - Manual (Page 20)

18 Genie IWP Super Series Part No. 48643
Operator’s Manual Second Edition • Fourth Printing
OPERATING INSTRUCTIONS
Emergency Stop
1 Push in the red Emergency Stop button at the
platform controls or at the ground controls to
stop the up function.
Platform Raise & Lower
1 Twist to release the red Emergency Stop button
at the platform controls.
2 Push in the control activate button and rotate
the up/down switch in the desired direction of
travel.
ANSI & CSA CE
a control activate button
b up/down switch
Manual Lowering
1 Activate the manual
lowering valve located
at the bottom of the
hydraulic cylinder.
Auxiliary Platform Lowering
1 Turn the key switch to ground control
(if equipped).
2 Activate the auxiliary platform lowering button at
the ground controls.
After Each Use
1 Select a safe storage location—firm, level
surface, weather protected, clear of obstruction
and traffic.
2 Pull the base lowering handle to lower the base
until all four foot pads are in firm contact with
the ground.
3 Remove the key to secure from unauthorized
use.
4 DC models: Recharge battery.
a b a b