Grundig MF 72-6510/8 - Manual (Page 9)

ENGLISH
9
Searching for television stations
The television is equipped with an automatic station search system.
You start the search and can then sort the television stations into
your order of preference.
There are 899 preset positions for digital stations and 100 for ana-
logue television stations, to which you can assign television stations
from the antenna or from the cable connection (analogue pro-
grammes).
1 Switch on the television with »
Ȃ
« on the television set, then
press » P+ « on the remote control.
– The »Language« menu appears when the television is first
switched on.
Hint:
If the »Language« menu does not appear on the screen, follow
the instructions on page 34 to retune all television channels
using the automatic search.
2 Select language with » P+ «, » P- «, »
Ǹ
« or »
Ƿ
« and press
» OK « to confirm.
– The »Channel search - Digital« menu appears and the search
begins. The automatic search may last several minutes
depending on the number of television channels received.
– The search is finished when the message »Done« appears.
3 Press »
Ȅ
« (green) to quit the station search.
– The »DVB Menu« appears.
4 Select »Installation« by pressing » P- « or » P+ « and press
» OK « to confirm.
– The »Installation« menu appears.
5 Select »Region« with » P- « or » P+ «.
6 Select the country with »
Ǹ
« or »
Ƿ
«.
Finishing the settings
1 Press » i « to finish the settings.
Note:
If you can only receive analogue television stations, adjust the
settings as described in the chapter “Changing stored channels
for analogue stations” on page 32.
SETTINGS
______________________________________________
DVB Menu
Manual Search
Automatic Search
Reset receiver
Installation
Signal Information
Select
● F Back
● i Exit
Language
English Nederlands Türkçe
Deutsch Eλληvικα Polski
Francais Dansk Pycck
Italiano Svenska Magyar
Español Suomi Slovenãina
Portuguesa Norsk âe‰tina
Select