Settings, 15 audio settings – Grundig MF 72-6510/8 User Manual
Page 15
ENGLISH
15
Audio settings
1
Press »
i
« to open the »MENU«.
– The »MENU« appears.
2
Select »Sound« with »
P+
« or »
P-
« and confirm with »
OK
«.
– The »Sound« menu appears.
Note:
Further operation is explained in the following sections.
Volume
The standard volume is set here. This is the volume of the device
after switching on.
1
Select »Volume« with »
P+
« or »
P-
« and adjust the setting with
»
Ǹ
« or »
Ƿ
«.
Balance
1
Select »Balance« with »
P+
« or »
P-
« and adjust the setting with
»
Ǹ
« or »
Ƿ
«.
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual II «) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
1
Select »Sound type« with »
P+
« or »
P-
« and adjust the setting
with »
Ǹ
« or »
Ƿ
«.
Stereo width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
1
Select »Sound mode« with »
P+
« or »
P-
«.
2
Press »
Ǹ
« or »
Ƿ
« to select the setting.
SETTINGS
______________________________________________
Sound
Volume
Balance
Sound type
Stereo
Sound mode
Normal
AVL
Off
Dynamic Bass
On
Equalizer
Headphone
●
F
Back
●
i
Exit
MAIN MENU
Sound
Picture
Preset list
Channel settings
Settings
Select
●
i
Exit
ǵ
Sound
Volume
Balance
Sound type
Stereo
Sound mode
Normal
AVL
Off
Dynamic Bass
On
Equalizer
Headphone
●
F
Back
●
i
Exit