GarrettCom 1008 - Manual (Page 10)

Magnum 1000 Workgroup Hubs Installation and User Guide (04/02)
4
www GarrettCom com . .
2.0 INTRODUCTION
2.1 Inspecting the Package and Product
Examine the shipping container for obvious damage prior to installing this
product; notify the carrier of any damage which you believe occurred during shipment
or delivery. Inspect the contents of this package for any signs of damage and ensure that
the items listed below are included.
This package should contain:
1 Magnum 1008, 1016 or 1024 Workgroup Hub
1 Set of metal “ears” for optional rack-mounting (Models 1016, 1024 only)
1 AC Power Cord (U.S. and other 115 VAC only)
1 Installation and User Guide
1 Product Registration Card
Remove the items from the shipping container. Be sure to keep the shipping
container should you need to ship the unit at a later date. To validate the product
warranty please complete and return the enclosed Product Registration Card to
GarrettCom, Inc. as soon as possible.
In the event there are items missing or damaged, contact the party from whom
you purchased the product. If the unit needs to be returned, please use the original
shipping container if possible. Refer to Section 5, Troubleshooting, for specific return
procedures.
2.2 Product Description - Magnum 1000-series Workgroup Hubs
Magnum 1000 Workgroup Hubs are full-featured 10BASE-T Ethernet hubs.
Magnum 1000 Hubs provide a low cost, flexible solution for networking a small
workgroup or for adding additional nodes to an existing network via twisted pair
cabling. Magnum 1000 Hubs are well suited for small- to medium-size facilities
requiring an independent Ethernet network, and will operate as self-sufficient devices to
provide 10BASE-T Ethernet connectivity for all local users and devices. Small
independent networks built using Magnum 1000 Hubs are easily expanded by
cascading, adding hubs of the same or similar types to grow the network.