Grandstream Networks GXV3601 - Manual (Page 31)

GXV3601 IP Camera
Firmware 1.0.4.6 Page 31 of 36
Grandstream Networks, Inc. 09/2010
To Edit a Monitored Area
1. In the Select a Region dropdown list, select
the region ID.
2. Click Edit.
3. Click on the video, drag and draw you
preferred area.
4. Set the Sensitivity. Click the Save button to
save the sensitivity.
NOTE: The Sensitivity value varies from 0 to
100. The larger the value is, the higher the
sensitivity.
5. Click Save to save the settings.
To Remove a Monitored Area
1. In the Select a Region dropdown list, select the region you would like to remove.
2. Click Remove.
3. Click Save to save the changes.
Configure Motion Detection & Alarm Actions
An alarm action is what the GXV3601 is going to do when an alarm is triggered during the
defined time period – the time
schedule. The GXV3601 allows
multiple alarm actions.
Configure Motion Detection Time Schedule
This section allows you to configure the time during which the GXV3601 will monitor the
motion detection. The GXV3601 not only can monitor your settings but also can take actions
when the alarm is triggered.
Button to save sensitivity
only
Dropdown list for date Available time
schedules Monitored region