Grandstream Networks GSM gateway User Manual
Page 29
3.2.1.4 Saving the Configuration Changes
Once a change is made, the user should press the “Update” button in the Configuration Menu. The IP
phone will then display the following screen to confirm that the changes have been saved.
Users are recommended to power cycle the VOIP Client-488 after seeing the above message.
3.2.1.5 Remotely rebooting VoIP Client ATA
The administrator of the phone can remotely reboot the phone by pressing the “Reboot” button, at the Configurations menu
button. Once done, the following screen will be displayed to indicate that
rebooting is underway
.
At this point, the user can relogin to the phone after waiting for about 30 seconds.