Grizzly T10446 - Manual (Page 6)

Model t10446 heavy-duty hammer drill -4 -
section 2: introduction
We are proud to offer this manual with
your new hammer drill! We've made every
effort to be exact with the instructions,
specifications, drawings, and photographs
of the tool we used when writing this man-
ual. however, sometimes we still make an
occasional mistake.
also, owing to our policy of continuous
improvement, your hammer drill may not
exactly match the manual. if you find this
to be the case, and the difference between
the manual and the tool leaves you in
doubt, check our website for the latest
manual update or call technical support
for help.
For your convenience, we post all avail-
able manuals and manual updates for
free on our website at www.grizzly.com.
any updates to your model of tool will be
reflected in these documents as soon as
they are complete.
foreword
power requirements ..........................................................................110V, 60 hz, 15 amps
tool Wattage .......................................................................................................... 720 Watts
extension Cord requirements ....................................... Minimum 14 aWg, Maximum 50 ft.
no-Load rotational speed ...................................................................................... 700 rpM
impact Frequency .................................................................................................. 3600 BpM
Maximum Bit diameter ........................................................................................................ 1"
Chuck type .....................................................................................................................sds
rotation ......................................................................................Clockwise (non-reversible)
applications ..................................... drilling Concrete, stone, and other Masonry Materials
specifications
contact info
We stand behind our tools. if you have any
service questions, parts requests or gen-
eral questions about the tool, please call or
write us at the location listed below.
grizzly industrial, inc.
1203 Lycoming Mall Circle
Muncy, pa 17756
phone: (570) 546-9663
e-Mail: [email protected]
We want your feedback on this manual.
if you can take the time, please email or
write to us at the address below and tell
us how we did:
grizzly industrial, inc.
C/o technical documentation Manager
p.o. Box 2069
Bellingham, Wa 98227-2069
email: [email protected]
When using a portable generator to power the hammer drill, make sure that the
running wattage of the generator is at least 1400 watts or higher to cover the
surge requirements of the tool.