24 timed baking, How to set delay start and automatic stop – GE Monogram ZET737 User Manual
Page 24
24
TIMED BAKING
(continued)
How to Set Delay Start and Automatic Stop
To avoid possible burns, place the shelves in the
correct position before you turn the oven on.
You can set the control to delay the start of cooking,
cook for a specific length of time and then turn off
automatically.
1. Press BAKE.
2. Press the number pads to set the
temperature.
3. Press COOKING TIME.
NOTE: If your recipe requires
preheating, you may need to add
additional time to the cooking time.
4. Press the number pads to set the
baking time.
5. Press DELAY START.
6. Press the number pads to set the time
of day you want the oven to turn on and
start cooking.
7. Press START.
If you would like to check the times
you have set, press DELAY START to
check the start time you have set or
press COOKING TIME to check the
length of cooking time you have set.
When the oven turns on at the time
of day you have set, the display will
show the changing temperature
(starting at 100°F.) and the cooking
time countdown.
At the end of cooking time the oven
will turn off and the end of cycle tone
will sound.
8. Press CLEAR/OFF to clear the end of
cycle tone if necessary.
NOTE:
• The low temperature zone of this oven (between
170°F. and 200°F.) is available to keep hot cooked
foods warm. Food kept in the oven longer than two
hours at these low temperatures may spoil.
• Foods that spoil easily, such as milk, eggs, fish,
stuffings, poultry and pork, should not be allowed
to sit for more than one hour before or after cooking.
Room temperature promotes the growth of harmful
bacteria. Be sure the oven light is off because heat
from the bulb will speed harmful bacteria growth.
CLEAR
OFF
D E L A Y
S T A R T
START
D E L A Y
S T A R T
C O O K I N G
T I M E
BAKE
Easy Steps:
1. Press BAKE.
2. Press the number pads to select oven temperature.
3. Press COOKING TIME.
4. Press the number pads to set the length of
baking time.
5. Press DELAY START.
6. Press the number pads to set the desired
start time.
7. Press START.
24