GE Monogram ZET737 User Manual

Page 19

How to Set Your Oven for Convection Roasting When Using the Temperature Probe

NOTE: For best results when roasting large turkeys and
roasts, we recommend using the probe included in the
convection oven. For the correct placement of the probe,
see the description in the Roasting section.

The display will flash if the probe is inserted into
the outlet and you have not set a probe temperature
and pressed START.

1. Place the shelf

in the lowest position
(A). Insert the probe
into the meat.

2. Plug the probe into

the outlet in the
oven. Make sure
it is pushed all
the way in. Close
the oven door.

3. Press CONVECTION ROAST.

4. Press the number pads to set the oven

temperature.

5. Press PROBE.

6. Press the number pads to set the internal

meat temperature.

7. Press START.

The word “LO” will be in the display.

After the internal temperature of the
meat reaches 100°F., the changing
internal temperature will be shown in
the display.

8. When the internal temperature of the meat

reaches the temperature you have set, the
probe and the oven turn off and the oven
control signals. To stop the signal, press
CLEAR/OFF. Use hot pads to remove the
probe from the food. Do not use tongs to
pull on it—they might damage it.

CAUTION: To prevent possible burns, do not unplug
the probe from the oven outlet until the oven has
cooled. Do not store the probe in the oven.

NOTE: You cannot use a timed oven operation when
using the probe. You can use the KITCHEN TIMER
ON/OFF for timing the cooking time.

To change the oven temperature during the
Convection Roast cycle, press CONVECTION
ROAST and set the new temperature.

CLEAR

OFF

START

P R O B E

R O A S T

CONVECTION