Gefen EXT-HDMI1.3-CAT6-4X - Manual (Page 28)

24
RS-232 SERIAL COMMANDS
General Functions
Simplifi ed syntax was used for command implementation for faster operation with
the device: # character – isn’t needed, the command name is reduced to 1 letter.
The commands are not case-sensitive.
Function Description
#RMTIRADD
Routing command
#LOCKPOWER
Routes a single input to all outputs
#RMTIRADD Function
The #RMTIRADD function set the remote IR channel.
Syntax y :
#RMTIRADD param1
Parameters:
param1
IR channel [0 - 3]
Value Meaning
0 IR channel 1
1 IR channel 2
2 IR channel 3
3 IR channel 4
#LOCKPOWER Function
The #LOCKPOWER enables/disables the power lock state. Enabling this feature
will store the 5V status for each input prior to shutting the unit down.
Syntax y :
#LOCKPOWER param1
Parameters:
param1
State [0 - 1]
Value Meaning
0 Disable Power Lock
1 Enable Power Lock