Gefen EXT-HDMI1.3-CAT6-4X - Manual (Page 11)

7
RECEIVER PANEL DESCRIPTIONS
1 Control Buttons
When connected to any 4x4 Matrix for HDMI, these remote buttons on the
Receiver unit can switch between the 4 Hi-Def inputs connected to the 4x4
Matrix for HDMI.
2 IR Sensor
Control the Receiver unit by pointing the IR Remote Control to the IR Sensor.
3 EQ Trimpot
Used to equalize the signal to compensate for distance and skew variations
found in various brands of CAT-6 cable.
4 Input Indicators (HDMI In 1 - HDMI In 4)
An LED will Displays the current input of the 4x4 Matrix.
5 Power Indicator
This LED will turn bright red once the power supply has been properly
connected.
6 IR Extender Port
Used to extend the IR Sensor range of the Receiver unit.
7 CAT6 In Connector
Connect the CAT-6 cable from the Sender unit to the RJ-45 connector.
8 HDMI Out
Connect the HDMI cable from the HDTV display to the HDMI Out.
9 RS-232 Input
Connects a controlling device to this port.
10 5V DC Locking Power Connector
Connects the included 5V DC Locking Power Supply to this receptacle.