GE Monogram Side-by-Side Stainless Steel Free-Standing Refrigerators - Manual (Page 17)

17
Automatic Icemaker
Stainless Steel Refrigerator
Automatic
icemaker
The icemaker will produce seven cubes
per cycle—approximately 100–130 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other use
conditions.
If the refrigerator is operated before the
water connection is made to the icemaker,
set the power switch in the O (off) position.
When the refrigerator has been connected
to the water supply, set the power switch to
the l (on) position.
The icemaker will fill with water when it
cools to 15°F (–10°C). A newly-installed
refrigerator may take 12 to 24 hours to
begin making ice cubes.
You will hear a buzzing sound each time
the icemaker fills with water.
Throw away the first few batches of ice to
allow the water line to clear.
Be sure nothing interferes with the sweep
of the feeler arm.
When the bin fills to the level of the feeler
arm, the icemaker will stop producing ice. It is
normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
NOTE: In homes with lower-than-average water
pressure, you may hear the icemaker cycle multiple
times when making one batch of ice.
A newly-installed refrigerator may take 12 to 24 hours to begin making ice.
Pull the upper freezer shelf straight
out to access the icemaker.
Always be sure to replace the shelf.
The shelf can be used for storage.
Icemaker
Feeler Arm
Power
Switch
Green Power Light
Ice Drawer
Shelf
Ice storage
drawer To access ice, pull the drawer forward.
To remove the drawer, pull it straight out and
lift it past the stop location.
Ice Drawer