Grizzly H7760 - Manual (Page 4)

-2-
H7760 2" x 27" Belt Sander & 6" Grinder
If you have any comments regarding this manual,
please write to us at the address below:
Grizzly Industrial, Inc.
C /
O
Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
We stand behind our machines. If you have any
service questions or parts requests, please call or
write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Foreword
INTRODUCTION
Contact Info
We are proud to offer the Model H7760 Combination
2" x 27" Belt Sander & 6" Grinder. This machine is
part of a growing Grizzly family of fine machinery.
When used according to the guidelines set forth in
this manual, you can expect years of trouble-free,
enjoyable operation and proof of Grizzly’s commit-
ment to customer satisfaction.
We are pleased to provide this manual with the
Model H7760. It was written to guide you through
assembly, review safety considerations, and cover
general operating procedures. It represents our
effort to produce the best documentation pos-
sible.
The specifications, drawings, and photographs
illustrated in this manual represent the Model
H7760 as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
For your convenience, we always keep current
Grizzly manuals available on our website at
www.
grizzly.com. Any updates to your machine will be
reflected in these manuals as soon as they are
complete. Visit our site often to check for the lat-
est updates to this manual!