GE 25450 - Manual (Page 34)

To Save a Number from the Redial Log to Directory (Base Unit)
1. Press the Redial button.
2. Press 5 or 6 on the
Navigation button to scroll to the number to be saved.
3. Press soft button.
4. Enter a name, and then save the number. Please refer to Directory section for
detailed operation.
Making a Call (Cordless Handset)
Press and hold the End button to turn on the Cordless Handset. You will hear a
confirmation tone and see the display when the Handset is on. Calls can be made by
pressing the Talk or Speaker buttons or plugging in a headset.
Auto Line-Selection Dial (Cordless Handset)
The Auto Line-Selection Dial function allows the user to dial a phone number with-
out first choosing a line. An available line is automatically selected.
1. Press the
Talk or Speaker button.
NOTE: To cancel dialing at any time, press the End button.
2. The display will show “Press REDIAL or dial number” or the dialing prefix if it is
enabled via the phone setting menu.
3. Press the soft button to redial the last number called, or enter the
phone number using the keypad (0–9, *, #).
4. If the Cordless Handset can not establish a connection to the Base Unit after 15
seconds, it will show “No connection”. If all usable phone lines are not available,
it will show “No line is available”. If there are usable phone lines available but all
system resources are in use, the display will show “System busy”.
5. Otherwise, it will enter talk mode. The corresponding receiver, headset, or speak-
erphone will be turned on.
Using Your RCA 25450 Phone System