GE 25450 - Manual (Page 31)

Using Your RCA 25450 Phone System
Your RCA 25450 Phone System comes ready to use. This section details the basic
operation of the Base Unit and Cordless Handset, including instructions on making,
receiving and ending a call, call waiting, switching between audio modes, putting a
call on hold, muting, call forwarding, transferring a call, and using the intercom.
Making a Call
Calls can be made using Base Unit handset, Cordless Handset, Headset, or Speaker-
phone. A call duration timer will display the length of the call after the connection
is established.
Making a Call (Base Unit)
Auto Line-Selection Dial (Base Unit)
The Auto Line-Selection dial function allows the user to make a call without choos-
ing a phone line. An available line is automatically selected.
1. Press the
Dial, Speaker or Headset button (when a Headset is plugged in), or pick
up the Handset (off-hook).
NOTE: To cancel dialing at any time, press the Speaker, or Headset button again, or return the
handset to the cradle.
2. If all usable phone lines are not available, the display will show
“No line available.”
3. If a phone line is available, the phone will enter talk mode and the display will
show “Press REDIAL or dial number”, or the display will show the dialing prefix if
it is enabled by the phone setting menu. The Speakerphone, Headset, or Handset
will be turned on.
4. Press the Redial button to redial the last number called, or enter the phone num-
ber using the keypad (0-9, *, #).
Using Your RCA 25450 Phone System
1