Programming the handset – GE DECT6.0 28128 User Manual

Page 25

. Use the

button to scroll to desired device.

4. Press the Select (SKL) button to select.

To edit the name;

1. Use the

button to scroll to

Edit Name.

. Press the Select (SKL) button to confirm, use the number keys to enter the cell

phone name (maximum 15 characters).

. Press the Store (SKL) button to save your selection. You will hear a confirmation

tone.

To deregister the device;

NoTE: once the device has been deregistered, you must reregister

it again in order to re-connect to base.

1. Use the

button to scroll to

Deregister.

. Press the Select (SKL) button to confirm.

Deregister? shows on the display.

. Press the Yes (SKL) button to confirm.

My Base

from the Bluetooth menu:

1. Use the

button to scroll to

My Base, the information for the base shows

on the display.

. Press the Select (SKL) button to change the name or PIN code.
. Press the Store (SKL) button to confirm.

ProGrAMMING THE HANDSET

NoTE: Menu settings on the handset and on the base are separate

and do not interface with each other, which means changing menu

settings on the handset affects ONLY the settings on the handset.

There are three programmable menus available: Alarm, Phone Settings, and Sound

Settings.

larm

Set an alarm, then program the snooze time, occurance, and melody preferences.

1. Make sure your handset is

off (not in talk mode).

. Press the Menu (SKL) button to enter the main menu.
. Use the

button to scroll to

Alarm.