GE DECT6.0 28128 User Manual

Page 24

luetooth

etup

This unit supports a maximum of two Bluetooth cell phone devices. To use your

Bluetooth cell phone device with the 1 system,

you must activate Bluetooth on

your device and then pair the device to the base.

NoTE: Your Bluetooth cell phone device should be within 2 feet

to 10 feet from the base. If the device is too close it may create

undesired noise. If device is too far it will not pair.

1. Make sure your base is

off (not in talk mode).

. Press the Menu (SKL) button to enter the main menu.
. Use the

button to scroll to

Bluetooth.

4. Press the Select (SKL) button to enter the sub-menu. There are three

programmable menus:

Connect, My Device, and My Base.

Connect (and Pair)

NoTE: when connecting for first time you must use the base menus

and not the quick Connect/Bluetooth button.

from the Bluetooth menu:

1. Use the

button to scroll to

Connect.

. Press the Select (SKL) button to enter the menu.

(refer to the instruction manual for your cell phone device on the proper

procedure to add and pair a new device.)

the base displays

connect; Please wait...,

. Use the number keys to enter the default PIN 0000 on your Bluetooth cell phone

device. When the device is paired successfully, the information shows on the base

display, e.g.

NOKIA 6230 CONNECTED.

NoTE: If two cell phones have been registered, a prompt message

MAXIMUM DEVICES CONNECTED shows on the display.

My Devices

Change the device name or deregister a Bluetooth cell phone device from the base to

allow registration of another device.
from the Bluetooth menu:

1. Use the

button to scroll to

My Devices.

. Press the Select (SKL) button to enter the sub-menu. A list of registered devices

shows on the display.