Go-Video DVR 4550 - Manual (Page 33)

27 6 - Timer Recording
SELECT EVENT [1-16] :01
/ To Move To Select
1 10:30 PM On Wednesdays
Ch10 1H30M Auto
2 - - : - - - - - - - - - - / - -
Ch - - - H - - M - -
3 - - : - - - - - - - - - - / - -
Ch - - - H - - M - -
4 - - : - - - - - - - - - - / - -
Ch - - - H - - M - -
...continued
AUDIO
RETURN
1 0 V I E W E V E N T S U M M A R Y
Press RETURN to confirm the event and
view a summary of all programmed events.
• The event is now stored in memory and
will record at the scheduled time. It is
not necessary to turn the DVD+VCR off
or put it into a “Timer” mode; the event
will record regardless of the state of the
DVD+VCR.
• The “Timer” indicator will light on the
front panel display. If there is a timer
recording error, the “Timer” indicator
will blink and an error message will
appear on the screen (see “Timer Re-
cording Errors”below).
• To program another event, select any
available event number.
• To edit an event, select its event num-
ber.
• To delete an event, use the UP/DOWN
arrow keys to select it, then press
CLEAR.
• To exit the Select Event screen, press
SETUP/ENTER.
N O T E
• Complete Program Record (CPR) adjusts the record speed to make sure the tape does not run out
before the Timer Recording is complete. With Record Speed set to “Auto,” the DVD+VCR will begin
recording in SP. It will then calculate how much time is remaining on the tape and adjust the record speed
to SLP if necessary. If there is not enough room to record the entire show, the DVD+VCR will record in SLP
until the end of the tape is reached.
TIMER RECORDING ERRORS
Ta p e M i s s i n g
Solution: Insert a tape in the VCR
deck.
Ta p e M i s s i n g Ta b
Solution: Insert a tape with a record
safety tab.
N o t R e a d y
Solution: The VCR deck is already in
use. Press STOP on this deck.
O v e r l a p p i n g E v e n t s
Solution: If two programmed events
overlap, you will be prompted to
either delete one of the events, or
allow them to overlap. If you allow
them to overlap, the event with the
earliest starting time will be com-
pletely recorded, then the remainder
of the event with the next earliest
starting time will be recorded.
T I M E R R E C O R D I N G E R R O R S