GIGABYTE Rack Mount Server GS-SR125EDL - Manual (Page 43)

43
BIOS Setup
4 Floppy Disk Controller
Enable and disable the function of floppy disk controller.
8 Disabled Disable the configuration.
8 Enabled Enable the configuration.
8 Auto BIOS or O.S will select the configuration automatically.
4 Base I/O address
Set the base I/O address for the floppy disk controller by usine this option.
8 Primary Set the base I/O address to 3F0~3F7. (Default)
8 Secondary Set the base I/O address to 370~377
CUSB Host Controller
This option allows user to enable USB host controller.
8 Enable Enable USB host controller. (Default Value)
8 Disabled Disable this function.
COnboard PXE Function
This option allows user to enable PXE function.
8 Enable Enable PXE function.
8 Disabled Disable this function. (Default Value)
CSystem After AC Back
8 On State System power state when AC cord is re-plugged.
8 Off State Do not power on system when AC power is back. (Default Value)
8 Last State Set system to the last sate when AC power is removed. Do not power on
system when AC power is back.