Step 2-5: pci expansion card installation – GIGABYTE Rack Mount Server GS-SR125EDL User Manual

Page 13

Text mode
Original mode

Hardw are Installation Process

Step 2-5: PCI Expansion Card Installation

GS-SR125EDL provides expansion riser slots for two peripheral cards, 100/133MHz , one full-height/
one half-length. To install the peripheral, please go through the following steps.
Step 1 Remove the screws on the riser bracket.
Step 2 Detach the riser bracket with both hands.
Step 3 Installing the PCI Riser card. To install the riser card, just simply push it into the module.
Step 4 Secure the card with screws.

Repeat Step 3 & 4 to install the rest of add-on cards.

Step 5 Finally, align the stable racks to the system module (see the arrow direction mark 1), and push

down vertically.

Step 6 Reverse Step 1 & 2 to secure the riser bracket firmly. Installation completed.

Step 1

Step 2

Step 3

Step 4

PCI Slot 2 is not compliance with this model.