GE ZET958 30 - Manual (Page 41)

41
Before You Call For Service…
Wall Oven
Save time
& money!
Review the
troubleshooting tips
on the following
pages first and you
may not need to
call for service.
PROBLEM POSSIBLE CAUSE
CLOCK AND TIMER • A fuse in your home may be blown or the circuit breaker tripped.
DO NOT WORK Replace the fuse or reset the circuit breaker.
• Oven controls improperly set. See the Oven Control, Clock and Timer
section.
OVEN LIGHT DOES • Light bulb is loose or defective. Tighten or replace the bulb.
NOT WORK
• Pad operating light is broken. Call for service.
OVEN • Oven thermostat needs adjustment. See the Adjust the Oven Thermostat
TEMPERATURE Do it yourself! section.
TOO HOT OR
TOO COLD
OVEN WILL • A fuse in your home may be blown or the circuit breaker tripped.
NOT WORK Replace the fuse or reset the circuit breaker.
• Oven controls improperly set.
FOOD DOES NOT • Oven controls improperly set. See the Baking or Roasting section.
BAKE OR ROAST
• Rack position is incorrect or the rack is not level.
PROPERLY
• Incorrect cookware or cookware of improper size being used.
• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat
Do it yourself! section.
FOOD DOES NOT • Oven controls improperly set. Make sure you press the BROIL
BROIL PROPERLY HIGH/LOW pad.
• Improper rack position being used. See the Broiling guide.
• Food being cooked in a hot pan. Use the broiling pan and grid that
came with your oven. Make sure that it is cool.
• Cookware not suited for broiling. Use the broiling pan and grid that
came with your oven.
• The probe is plugged into the outlet in the oven. Remove the probe
from the oven.
• Aluminum foil used on the broiling pan and grid has nor been fitted
properly and slit as recommended.
• In some areas the power (voltage) may be low. Preheat the broil
element for 10 minutes. Broil for the longest period of time
recommended in the Broiling guide.
OVEN WILL NOT • The oven temperature is too high to set a self-clean operation.
SELF CLEAN Allow the oven to cool and reset the controls.
• Oven controls improperly set. See the Using the Self-Cleaning Oven
section.
• The probe is plugged into the outlet in the oven. Remove the probe
from the oven.
“CRACKING” OR • This is normal. It is the sound of the metal heating and cooling
“POPPING” SOUND during both cooking and cleaning functions.
EXCESSIVE SMOKING • Excessive soil. Press the CLEAR/OFF pad. Open the windows to rid
DURING CLEAN the room of smoke. Wait until the LOCKED light goes off.
CYCLE Wipe up the excess soil and reset the clean cycle.