Globe 3850 - Manual (Page 18)

Page 19
End Weight Slide Rod
1. Add a few drops of Globe oil to the end weight rod daily (Fig. 19-1).
Move the end weight up and down several times to distribute the oil.
Sharpener
1. The sharpener shafts should be lubricated every couple of days with
a few drops of Globe oil. Add Globe oil to each of the sharpener shafts
as designated by the arrows (Fig. 19-2 and
Fig. 19-3).
Other Lubrication
It is recommended that all threaded screws be
lubricated after each cleaning to maximize the life
of your slicer.
SIMPLE MAINTENANCE AND REPAIR
Slide Rod
Figure 19-1
Figure 19-3 Figure 19-2