GE MG14200 - Manual (Page 12)

10 Chapter 1
Connections & Setup
Use the CHAN ^/v and VOL +/-
buttons to move through the
menu system.
Plug in the TV
Plug the end of the power cord into the wall outlet. Match the wide blade of the
plug with the wide slot in the outlet. Insert the plug completely into the outlet.
Put Batteries in the Remote
1. Remove the battery compartment cover on the remote.
2. Insert new batteries. Match the polarities (+ and -) on the batteries with the
diagram on the remote.
3. Put the battery compartment cover back on the remote.
How to Use the Remote Control to
Complete Setting Up the TV
The technical term is “Navigation” – how you move through the on-screen
menus. The theory is the same throughout the menu screens: highlight your
choice and select it.
To highlight a menu item, use the CHAN ^/v buttons to move up or down. Use
the VOL +/- buttons to select an item or change its setting.
You can also use the remote’s number buttons to select menu items directly.
Note: Highlighted means that the menu item stands out from other menu items
on the list (appears darker, brighter, or a different color).
Turn on the TV
Press the POWER button on the remote control or on the TV itself.
The first time you turn on your TV go through the following steps to set it up.
VOL VOL
CHAN
CHAN
MENU