GE CTR 80 - Manual (Page 58)

tomer Service to be sure that the proposed method will not damage the
equipment.
•
The condensing coil should be cleaned regularly. Inspect the coil through
the vented rear panel. If any dust or dirt accumulation is visible, remove
the rear panel to clean out the dust or dirt. Use a vacuum with a brush to
remove the dirt. Do not use compressed air as it might drive the dirt be-
tween the fins where it may become lodged preventing airflow.
•
If the instrument is used in a manner not in accordance with the equip-
ment design, the operation of the bath may be impaired or safety hazards
may arise.
56
12 Maintenance