beautypg.com

English, Flash bios method introduction, Method 1 : dual bios – GIGABYTE AMD Socket 754 Processor Motherboard GA-K8NS Pro User Manual

Page 56: Q-flash, A. what is dual bios technology, B. how to use dual bios and q-flash utility

background image

- 56 -

GA-K8NS Pro Motherboard

English

A. What is Dual BIOS Technology?

Dual BIOS means that there are two system BIOS (ROM) on the motherboard, one is the Main BIOS and the
other is Backup BIOS. Under the normal circumstances, the system works on the Main BIOS. If the Main
BIOS is corrupted or damaged, the Backup BIOS can take over while the system is powered on. This means
that your PC will still be able to run stably as if nothing has happened in your BIOS.

B. How to use Dual BIOS and Q-Flash Utility?

1.) After power on the computer, pressing immediately during POST (Power On Self Test) it will allow

you to enter Award BIOS CMOS SETUP, then press to enter Flash utility.

Flash BIOS Method Introduction

Method 1 : Dual BIOS

/ Q-Flash

2.) Award Dual BIOS Flash ROM Programming Utility

Dual BIOS Utility V1.33

Boot From.......................................................................... Main Bios
Main ROM Type/Size.........................................................

SST 39SF040

512K

Backup ROM Type/Size.....................................................

SST 39SF040

512K

Wide Range Protection

Disable

Boot From

Main Bios

Auto Recovery

Enable

Halt On Error

Disable

Keep DMI Data

Enable

Copy Main ROM Data to Backup

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Update Main BIOS from Floppy

Update Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

PgDn/PgUp: Modify

KL: Move

ESC: Reset

F10: Power Off

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

`

Standard CMOS Features

`

Advanced BIOS Features

`

Integrated Peripherals

`

Power Management Setup

`

PnP/PCI Configurations

`

PC Health Status

`

Frequency/Voltage Control

ESC: Quit

KLJI: Select Item

F8: Dual BIOS/Q-Flash

F10: Save & Exit Setup

Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving

Enter Dual BIOS/Q-Flash Utility (Y/N)? Y