beautypg.com

English, Power management setup, Acpi suspend type – GIGABYTE AMD Socket 754 Processor Motherboard GA-K8NS Pro User Manual

Page 46: Soft-off by pwr-bttn, Pme event wake up, Modem ring on, S3 resume by usb device, Resume by alarm

background image

- 46 -

GA-K8NS Pro Motherboard

English

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Power Management Setup

ACPI Suspend Type

[S1(POS)]

Soft-Off by PWR-BTTN

[Instant-Off]

PME Event Wake Up

[Disabled]

Modem Ring On

[Disabled]

S3 Resume by USB device

[Disabled]

Resume by Alarm

[Disabled]

x Day of Month Alarm

Everyday

x Time (hh:mm:ss) Alarm

0 : 0 : 0

Power On by Mouse

[Disabled]

Power On by Keyboard

[Disabled]

x KB Power ON Password

Enter

AC BACK Function

[Soft-Off]

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Default

F7: Optimized Defaults

Item Help

Menu Level`

[S1]
Set suspend type to
Power On Suspend under
ACPI OS

[S3]
Set suspend type to
Suspend to RAM under
ACPI OS

ACPI Suspend Type

S1(POS)

Set ACPI suspend type to S1/POS (Power On Suspend). (Default value)

S3(STR)

Set ACPI suspend type to S3/STR (Suspend To RAM).

Soft-Off by PWR-BTTN

Instant-off

Press power button then power off instantly. (Default value)

Delay 4 Sec.

Press power button 4 seconds to power off. Enter suspend if button is
pressed less than 4 seconds.

PME Event Wake Up

This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.

Disabled

Disable this function. (Default value)

Enabled

Enable PME as wake up event.

Modem Ring On

An incoming call via modem can awake the system from any suspend state.

Disabled

Disable Modem Ring on function. (Default value)

Enabled

Enable Modem Ring on function.

S3 Resume by USB device

Disabled

Disable this function. (Default value)

Enable

Enable USB device wake up system from S3 suspend type.

Resume by Alarm

You can set "Resume by Alarm" item at "Enabled" and key in data/time to power on system.

Disabled

Disable this function. (Default value)

Enabled

Enable alarm function to POWER ON system.

If RTC Alarm Lead To Power On is Enabled.
Day of Month Alarm :

Everyday, 1~31

Time (hh: mm: ss) Alarm :

(0~23) : (0~59) : (0~59)

Power Management Setup