beautypg.com

6 configuration guide, 1 dhcp mode, 2 static ip mode – Grandstream Networks HandyTone-496 User Manual

Page 16: 3 tftp server address, 2 configuring handytone-496 with web browser, 1 access the web configuration menu, Configuration guide, Onfiguring, Andy, Through

background image

HandyTone-496 User Manual

Grandstream Networks, Inc

.

16

6 Configuration Guide

6.1 Configuring HandyTone-496 WAN IP through Voice Prompt

6.1.1 DHCP Mode


Follow section 5.1 with voice menu option 01 to enable HandyTone-496 to use DHCP.

6.1.2 STATIC IP Mode


Follow section 5.1 with voice menu option 01 to enable HandyTone-496 to use STATIC IP mode, then
use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

6.1.3 TFTP Server Address

Follow section 5.1 with voice menu option 06 to configure the IP address of the TFTP firmware and
configuration file server.

6.2 Configuring HandyTone-496 with Web Browser


HandyTone-496 has an embedded Web server that will respond to HTTP GET/POST requests. It also
has embedded HTML pages that allow users to configure the HandyTone-496 through a Web browser
such as Microsoft’s IE and AOL’s Netscape.

6.2.1 Access the Web Configuration Menu


The HandyTone-496 HTML configuration menu can be accessed via LAN or WAN port:

• From the LAN port:

ƒ

Directly connect a computer to the LAN port.

ƒ

Open a command window on the computer

ƒ

Type in “ipconfig /release”, the IP address etc. becomes 0.

ƒ

Type in “ipconfig /renew”, the computer gets an IP address in 192.168.2.x segment by
default

ƒ

Open a web browser, type in the default gateway IP address. You will see the login
page of the device.

http://192.168.2.1

• The WAN port HTML configuration option is disabled by default from factory. To access the

HTML configuration menu from the WAN port, first enable the “WAN side HTTP access”