Gemini GEM-RP8 - Manual (Page 3)

3
Important - Test Your System Weekly!
1
Bell / Battery Test
Test your bell or siren by pressing A followed by 1 .
This will cause the bell, or siren to sound for 2 seconds and also
initiate a test of the battery.
2
Zone Test
Walk throughout the premises, opening each protected door or
window, and activating each motion sensor. Check the keypad to
see that each respective zone number displays in the window.
3
Central Station Communication Test
This test should only be performed on weekends or at a time
designated by your alarm company.
1. Notify Central Station of the impending test.
2. Secure all zones to light the Status Light on your keypad.
3. Enter your User Code followed by
D
to Arm the system.
4. Violate your alarm by opening a window / door etc.
5. The siren or bell should sound and the system will send the alarm
signals to the Central Station.
6. Enter your User Code followed by
D
to silence the alarm.
7. Call Central Station to insure that the alarm signals were received
properly.
System Information
Central Station Phone Number: ___________________
Central Station Account Number: _________________
For Service Call: ______________________________
Entry Delay: __________________________________
Exit Delay: ___________________________________
Alarm Time-out: _______________________________
T AB L E O F C O N T E N T S
TABLE OF CONTENTS
KEYPAD CONTROLS & INDICATORS ..................................................4
ARMING: SETTING THE ALARM WHEN LEAVING .............................5
ARMING: PROTECTING YOURSELF AT HOME .................................6
EMERGENCY CONDITIONS ..................................................................7
TURNING OFF THE ALARM (DISARMING) WHEN RETURNING .......8
FIRE PROTECTION ................................................................................9
FUNCTION MENU ...................................................................................11
SYSTEM TROUBLES ..............................................................................12
PROGRAMMING (OPTIONAL) ...............................................................14
GLOSSARY .............................................................................................15
LIMITED WARRANTY .............................................................................16