beautypg.com

Notice safety instructions for machinery – Grizzly G5954 User Manual

Page 8

background image

-6-

G5954 5HP Dust Collector

4. ALWAYS USE HEARING PROTECTION

WHEN OPERATING MACHINERY.
Machinery noise can cause permanent

hearing damage.

5. WEAR PROPER APPAREL. DO NOT

wear loose clothing, gloves, neckties, rings,

or jewelry which may get caught in moving

parts. Wear protective hair covering to con-

tain long hair and wear non-slip footwear.

6. NEVER OPERATE MACHINERY WHEN

TIRED, OR UNDER THE INFLUENCE OF

DRUGS OR ALCOHOL. Be mentally alert

at all times when running machinery.

1. READ THROUGH THE ENTIRE MANUAL

BEFORE STARTING MACHINERY.
Machinery presents serious injury hazards
to untrained users.

2. ALWAYS USE ANSI APPROVED

SAFETY GLASSES WHEN OPERATING

MACHINERY. Everyday eyeglasses only

have impact resistant lenses—they are

NOT safety glasses.

3. ALWAYS WEAR A NIOSH APPROVED

RESPIRATOR WHEN OPERATING

MACHINERY THAT PRODUCES DUST.
Wood dust is a carcinogen and can cause
cancer and severe respiratory illnesses.

For Your Own Safety, Read Instruction

Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This

manual uses a series of symbols and signal words which are intended to convey the level of

importance of the safety messages. The progression of symbols is described below. Remember

that safety messages by themselves do not eliminate danger and are not a substitute for proper

accident prevention measures.

Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.

Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.

Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.

This symbol is used to alert the user to useful information about
proper operation of the machine.

NOTICE

Safety Instructions for Machinery

SECTION 1: SAFETY